Home
About Martins
Rubber Mouldings
O Moulding
 O Tooling
Polyurethane Foam
O Moulding
 O Tooling
Conversion
O Dunlop Adhesives
 O Anti Vibration
 O Gaskets
 O Sheeting - Foam
 O Sheeting - Rubber
 O Extrusions
 O Fabrications
 O Floor Matting
 O Electrical Matting
Seals
O Seal Manufacturing
 O Seal Jet
 O Seal Materials
 O O-Ring Sizes
 O O-ring Grooves
 O Seal Grooves
 O M.R. Seal Kits
 O Excavator Range
 O Hammer Range
Documents
Quality
Technical
O Material Comparison
Gallery
Contact
Where we are
Site Map
MR Thumpercross
Web Links
M.R. Quality Parts Replacement Seal Kits for Hydraulic Plant & Equipment Trademark LOGO.

Product Data Sheet 6.00 mm Electrical Matting

PRODUCT DATA SHEET Printable Version  Back 
Product:11kv Rated Electrical Safety Matting
General Description:Natural rubber based electrical matting produced in 6.5mm with continuous 2mm high ribbed pattern and providing safe working with standard 3 phase 450 volt equipment.

Material Properties:

A. Rubber
  Tensile Strength
Before & after ageingš		 5 MPa min BS903
  Elongation at break
Before & after ageingš		 250% min BS903
  Compression set
Before & after ageingš ˛		 10% max BS903

B. Product
  Electrical Breakdown Strength
11kv min BS921
  Leakage Current
160mA/m˛ max BS921
  Thickness
6.0 mm min BS921
  Weight
10kg / m˛



1 Property measured after ageing for 10 days at 70o in air oven.
2 Compression set assessed using constant load method described in BS 921.
THE INFORMATION CONTAINED IN THIS LEAFLET IS BASED UPON TECHNICAL DATA WHICH WE BELIEVE TO BE RELIABLE. THE FIGURES QUOTED ARE AVERAGE VALUES GIVEN IN GOOD FAITH AND WHILST ALL EFFORTS ARE MADE TO ENSURE CONSISTENCY. VARIATIONS MAY OCCUR.