How rubber gaskets are made
Posted on 18/02/2016 Category: Rubber gaskets
After 150 years in the rubber manufacturing trade, at Martin’s Rubber Company we know every trick in the book when it comes to producing the finest rubber gaskets. Here, we give you an in-depth guide to some of the most common techniques used in the production of rubber gaskets. Gasket manufacturing involves the complete spectrum of punching and cutting techniques. Let us give you a whistle-stop tour of the the various techniques that go into bringing a rubber gasket into production.
Rubber Gasket Punching
Established in the 1800’s, rubber gasket punching is a traditional process involving a Rule Forme. This is a special steel strip bent into the desired shape with the bottom edge sharpened into a blade. A hydraulic or power press forces this through a sheet of material and into a sacrificial cutting board below. This technique was originally popular within the shoe manufacturing industry in times gone by. Rule Formes are either one-piece forgings for extended production runs, or bent Rules set in plywood backing sheets for rapid production. The beauty of them is that the resulting shape punched out of the parent material is repeatable and always consistently sized. Semi-automated machinery makes it possible to punch out either low or high volume parts. While kiss-cutting helps to produce reels of parts, which can often be a convenient way of handling small punched parts, it is also possible to source off-the-peg flange and joint gaskets.
Water Jet Gasket Cutting
For a quick run of rubber gasket shapes, water jet cutting is sometimes preferred over punching. Basically, an extremely high-pressure jet of water (approximately 0.1mm diameter) is blown through a sheet of parent material to cut the desired shape. This technique allows soft or hard, solid or cellular materials to be cut into an infinite variety of shapes quickly and without the deformation often found in punching methods.
Laser Cutting Rubber Gaskets
This a similar process to water jetting. However, as the name suggests, it’s no longer a water jet that provides the cutting mechanism but rather a laser. This technique offers similar benefits and the only really difference from a manufacturing perspective is contending with a flammability risk, as opposed to potential wetting problems!
Rubber Gasket Hand Cutting
Hand cutting might be one of the oldest techniques in the gasket manufacturer’s armoury but it’s still by far one of the most reliable. Every day Martin’s Rubber is called upon to hand-mark shapes in sheet material. This gasket manufacturing process uses knives and saddle punches to create special or large gaskets.
Strip Cutting Rubber Gaskets
When gasket manufacturers are strip cutting rubber gaskets, they use a rotary knife that press cuts long sheets of material into strip form. It sweeps over the parent material, using a series of circular rotation knives, and the distance between the blades determines the width of the final strip. Last, but by no means least, highly skilled finishers trim, finish and package your rubber gasket to the standards of excellence that you’d expect throughout the manufacturing process. Contact Martin’s Rubber Company today on 023 8022 6330, or email [email protected], for more information about all our rubber manufacturing services and products.