Products by Industry

Niche Automotive:

Typical projects we have worked on and materials we stock or develop for this industry:

  • Drive shaft boots and seal development
  • Gearbox seal development
  • High temperature and tear resistant materials
  • Viton type fluorocarbon
  • Silicone
  • Fluorosilicone
  • PTFE bonding to rubber
  • Rubber bonding to titanium
  • Rubber bonding to Carbon Fibre
  • Vamac and equivalents
  • Seals for low friction applications
  • Seals for cooling systems
  • Aerodynamic seals
  • O rings
  • HNBR variants
  • Punched gaskets for fuel cells
  • Custom moulded sheets for AV mounts
  • Very soft solid silicone
  • Custom moulded Battery straps complete with clips
  • Turned seals
  • Prototype work
  • Wind tunnel work

Common products:

  • Gearbox seals
  • General seals and gaskets
  • O-rings
  • Suspension seals
  • Damping seals
  • Bobbins for vibration control
  • AV mounts
  • Piston seals
  • Automotive materials and equivalents
  • Grommets
  • Gaitors
  • Bushes and bushings
  • Door seals
  • Bulkhead seals
  • Fuel hatch gaskets
  • Hydraulic and Fuel bladders
  • Foam gaskets
  • Bump Stop rubbers
  • Damping pads
  • Stock rubber and polyurethane foam on the shelf
  • Connector seals
  • Extrusions and fabrications

Construction:

Typical projects we have worked on and materials we stock or develop for this industry:

Common products:

Seal jet lathe cut seals

  • Wipers, we have 15 styles including snap in, press in, double lip, scraper rings etc.
  • U-Seals,  we have Rod working , Piston working, Equal lipped U seals, Compact piston & rod U seals with anti extrusion rings, pneumatic piston & rod seals.
  • Hat seals
  • Cup seals
  • Chevron packs
  • Back up rings
  • Guide rings
  • 3 , 4, &  5 part compact Piston seals
  • V- rings
  • Shaft seals
  • Seals for hydraulic and pneumatic applications.

Sheet materials and Gaskets

  • Rubber strip
  • Punched washers
  • Punched or hand cut Gaskets
  • Pipe flange Gaskets
  • Punched and cut discs
  • Fabricated parts
  • Foam inserts (LD45)
  • Electrical safety matting
  • Fine fluted matting
  • Anti vibration materials (Tico type pads)

Moulded products

  • Anti vibration bushes
  • Moulded blocks
  • Bespoke parts

Defence

Typical projects we have worked on and materials we stock or develop for this industry:

  • Tank straps
  • Door hatch gaskets
  • Bellows
  • Ground box seals

Common products:

  • Fuel tank gaskets
  • Ammo box gaskets
  • Tank lid gaskets
  • Coupling bushes
  • Door seal strips
  • Gaiters and sleeves
  • Bellows
  • Rubber Roller re-covering
  • Rubber feet
  • Boots and Gaiters
  • Housing gaskets
  • Pipe or Flange gaskets
  • Spacers
  • Filter gaskets
  • Rubber plugs or bungs
  • Rifle butt pads

Electronics:

Typical projects we have worked on and materials we stock or develop for this industry:

  • O rings
  • Washers
  • ESM
  • Cut pads
  • Cut gaskets
  • Seals
  • Door cabinet seals
  • Extrusion
  • design and manufacture of boots

Common products:

  • Boots
  • Collet seals
  • Conductive gaskets
  • Antenna seals
  • ESM
  • Cable protectors
  • Bearing seals
  • Paddles
  • Rubber shrouds
  • Grommets
  • Bellow seal
  • Tico type pads
  • Anti-vibration pads
  • Optical products
  • Connector gaskets
  • LCD gaskets
  • Case seals
  • Rubber bungs
  • terminal seals
  • Interface gaskets
  • Cable connectors
  • Machinery mounting pads

Energy:

Typical projects we have worked on and materials we stock or develop for this industry:

Common products:

Moulding

  • Moulded seals for Butterfly Valves – Music note seals etc
  • 3”-84” in Nitrile / EPDM/ Viton/ HNBR
  • Spherical Angulation Joints
  • Diaphragm Assemblies
  • Seals for RST ( Rotary Stearable Tool) equipment
  • Tether clamps
  • Mid water arch clamps
  • Low temperature HNBR or Epichorhydrin materials
  • High specification Nitrile and Viton materials.

Polyurethane moulded parts

  • Pigs – Pipeline inspection gauges.
  • Fenders
  • Foam Ball Ends

SEAL JET SEALS

  • Seals for Down hole drilling – Fishing tool assemblies
  • Slipper seals in Glass filled PTFE with NBR or Viton O rings
  • Flapper seals in Glass filled PTFE
  • Vee Packings in Glass filled PTFE
  • Cable packings in Nylon 66
  • Wiper seals in Nylon 66 or Acetal
  • Piston Rings in PEEK or 30% Carbon graphite filled PTFE
  • Bypass check valves in Glass filled PTFE
  • Cable Bypass packings in NBR
  • Hydraulic Jar seal rings in Nylon 66
  • Hydraulic seals for rams and lifting equipment
  • Seals For Pumping equipment
  • Winch seals and sheave blocks
  • Rotary seals either custom or standard

Food & Drink:

Typical projects we have worked on and materials we stock or develop for this industry:

  • FDA and WRAS approved materials
  • Door bump strips and moulded corners for protection.
  • Silicone door extrusions etc
  • Fridge and freezer door seals and O rings in Silicone Expanded EPDM materials
  • Moulded cushions
  • Lathe cut washers
  • O rings
  • Diaphragms Etc
  • Sheet materials from stock, white food quality natrual rubber
  • Rollers re-covered in food quality silicone or other materials
  • Moulded polyurethane mounting bushes
  • PTFE Guide Blocks or Buffers
  • UHMWPE wear blocks

Leisure:

Typical projects we have worked on and materials we stock or develop for this industry:

  • ELectrical Safety Matting
  • Gym Matting
  • Partition Washers

Common products:

  • Electrical Safety Matting
  • Ticket machine consoles
  • Luxury floor mats
  • Roller recovering
  • Gym matting
  • Door mouldings
  • Paddle mouldings
  • Rubber bumpers
  • Wetsuit rings
  • Neck pillows
  • Cushions
  • Mounting feet
  • Matting

Medical

Typical projects we have worked on and materials we stock or develop for this industry:

  • Spreader or hoist bars for patient handling
  • Cot sides for surgical trolleys
  • Ice buckets for laboratory use
  • Support cushions
  • Headrests
  • Armrests
  • Insulating panels
  • Protective cowls
  • End caps
  • Foot rests
  • Back support
  • Leg rests
  • Cushion foams
  • bumper pads
  • O rings
  • Bottle seals
  • Bonded rollers
  • Floats
  • Valve sealing discs

Motorsport:

Typical projects we have worked on and materials we stock or develop for this industry:

  • Drive shaft work
  • Tyre bands
  • High temperature and high tear resistant components
  • Kevlar bonding
  • Aflas
  • Viton
  • Fluorosilicone
  • HNBR
  • Seals
  • 5-axis machined components
  • In-house tooling for product development
  • CAD on Solidworks
  • O rings
  • Punched gaskets
  • Moulded sheets
  • Foam sheeting from stock
  • Moulded straps with clips
  • CNC turned seals
  • Prototype work
  • KERS
  • Wind tunnel work
  • Wind tunnel scale model tyres

 

  • Common products:
  • Go kart seat cushions
  • Foot pedal rubbers
  • Engine components
  • Gaiters
  • Grommets
  • Anti Vibration products
  • Bushes
  • Steering wheel grips
  • Viton Tubing
  • Door seals
  • Packers
  • AV mounts
  • Viton sheeting
  • Fluorosilicone parts
  • High temperature high tear resistant silicones
  • Boots
  • Bulkhead seals
  • Fuel hatch gaskets
  • Tyre bands
  • Foam infills
  • Fuel line bladders
  • Confor Foam
  • Bump rubbers
  • Gearbox seals
  • Moulded gaskets
  • Damping pads
  • Jack wheel tyres
  • Sensor mounts
  • Connector seals
  • Moulded straps with metal clips
  • Bungs
  • Bobbins
  • Piston seals
  • Scraper seals
  • Suspension bushes
  • Seat foams
  • Seat backs
  • Drinks bags

 

Telecomms:

Typical projects we have worked on and materials we stock or develop for this industry:

  • Antenna mast seals
  • Electrical Safety Matting
  • Rubber shrouds
  • Grommets
  • Bellows seals
  • Terminal seals
  • Rubber bungs
  • Interface gaskets
  • Face seals
  • Cable connectors

 

Transportation:

Typical projects we have worked on and materials we stock or develop for this industry:

  • Electrical Safety Matting
  • Material identification permanent labelling
  • Washers
  • London Underground approved materials
  • Mast coats
  • Washers
  • O rings

 Common products:

  • Turnstile door paddles
  • Flame retardent seals
  • Transit system gate paddles
  • Mounting sleeves
  • Floor matting
  • Grommets
  • Mast coats
  • Shock absorber bump stops
  • Polyurethane overmoulded metalwork
  • Diaphragms
  • Ladder feet
  • Grips
  • Grip handles
  • Lifting handles
  • Door skirts
  • Plain rings
  • Door seals
  • Suspension seals
  • Electrical Safety Matting
  • Armrests
  • Fibre gaskets
  • Nosing rubbers
  • Tank hatch gaskets
  • Bellows
  • Gaitors
  • Cradle buffers
  • Shaft seals
  • Rotary shaft seals
  • Dust seal
  • Bushes
  • Extrusion
  • Draught excluder

Engineering:

Typical projects we have worked on and materials we stock or develop for this industry:

  • Bespoke sealing solutions for specific projects
  • Bearing assemblies
  • Gaskets
  • Moulded sleeves
  • Kits of seals and O rings
  • Moulded butterfly seals for pumps
  • Diaphragms
  • Bonded washers
  • Valve seals
  • Outlet seals
  • Sleeves

Manufacturing:

Typical projects we have worked on and materials we stock or develop for this industry:

  • Plunger diaphragms
  • Rollers
  • Wheels
  • Handle rubbers
  • Boots
  • Furniture guards
  • Extruded skirts
  • Vacuum suckers
  • Sheave wheels
  • Piston seals
  • Floor matting